You only need a phone we will provide the most suitable products
- Tel phone
- Close factory;Arise price;Investigate everything for four mo
- Flame retardant industry promotes low-smoke, non-toxic resea
- Notice about the relocation agency of ZOAN headquarters
- Zhuoan technology company won the China Wood Golden Sandal A
- The applications of 2017 Zhuo'an fire-retardant wooden struc
- Yanling wood structure industry fair has concluded and Sichu
- Definition and classification of fire resistant coatings.
- Why lubricating oil change regularly?
flame retardant IFR101A
- Category：Oil-based flame retardant
IFR101A ,which is exclusively used for fireproof coating, is compounded by common chemical materials,such as,acid resource,carbon resource,and gas resource.During producing,you just need to add a little additive,besides,it is environmental
The advantages of IFR 101A
|NO.||catalogue||classic system||IFR 101A|
|1||Material||three raw materials,such as,ammonium polyphosphate, pentaerythritol and melamine||
A single component.So it can effectively save time and manpower.
|2||Balling mill time||Because of three different fineness of raw materials,it needs 60-100 minutes to achieve uniform mixing.It is higher power consumption||About 400 mesh in all,which can greatly reduce the milling time (only needs 25-40 minutes), saving energy and reducing resource costs.|
|4||Product Performance||Many types materials,so it is not stable enough, and will migrate the durability.||Single component, high molecular weight, good compatibility with the substrate, good durability, excellent flame retardant effect, stable performance, which can ensure the fireproof performance is less affected by the flame retardant.|
|5||The product cost||The price is slightly lower, but the additive amount is large, so the cost of coating increased, more milling time , more power consumption.||
Slight higher for price , but the amount far less, so the entire coating can be flat or lower; Milling time is short,energy savings is slight.
Comparison foaming times and additive amount with classic system
(Classic system )
As an raw of material,it is suitable for all kinds of solvent-based fire-retardant coating(ultra-thin steel fire-retardant coating, thin steel fire-retardant coating, electric cable fire retardant coating, etc),and PP / PE plastic flame retardant
|No.||Inspection item||Technical requirements|
|3||bulk density||≤0.8 g/ml|
woven PE bag, 25kg / bag, 18bags/pallet,
Attention:12 months minimum at 25℃(77℉). Subject to re-inspection thereafter. Store in dry,shaded conditions away from sources of heat and ignition.
Order：flame retardant IFR101A